Figure 55 Operations > Move Media page
To move a tape, select the source and destination and then click the Move button in the center
of the screen to start the move.
Updating the current media inventory
Use the Operations > Inventory page to have the device re-scan the tapes to update the media
inventory.
Figure 56 Operations > Inventory page
Releasing and replacing the magazines
Use the Operations > Magazine page to release the left, right, or both magazines. When you
click Release, the device will unlock the magazine and display Left Magazine Unlocked or
Right Magazine Unlocked on the OCP screen. Once the magazines are unlocked, you can
remove any of the magazines on that side. If you do not remove the magazine within a few
seconds, the device will lock it. When you replace the magazine, the device will inventory the
magazine's tape cartridges.
82 Operating the tape library
To Next Page
Loading...
