Status = FAILED
message = The drive has failed.
type = drive
model = -
serialNumber = -
firmwareVersion = -
location = Port: 1I Box: 2 Bay: 2
volumeName = LUN 1
capacity = 1.00 TB
4. After identifying the issue that needs to be corrected, follow the instructions in the relevant
chapter of this guide.
5. Be sure to check that all problems have been resolved. Rerun the StoreOnce CLI command:
hardware show problems
The output returned should now be blank.
Using the StoreOnce CLI to identify a failed disk 15
To Next Page
Loading...
