To Next Page

To Previous Page

Figure 7 Template 4 cabling to customer's networks

bonded 1 GbE ports to customer's management sub-net1 and 3

bonded 1 GbE ports to customer's data sub-net2 and 4

Recommended versus required IP addresses

As long as sufficient IP addresses are allocated during the network configuration process, the

B6000 Backup System will automatically assign IP addresses for all the nodes in the system when

the network is initially configured and, subsequently, when additional couplets are added.

If sufficient IP addresses are not allocated, the automatic IP address assignment process cannot be

performed. When additional couplets are added, it will be necessary to redo the network

configuration process and allocate a range sufficient for all IPs required by the system. Any IP

addresses that have been assigned to the nodes during the previous configuration will not be

preserved. Even if you enter the same physical IP addresses, the Virtual Data IP addresses will

change and you will need to reconfigure backup targets and replication. (You will not lose any

data.)

The following table summarizes the combined physical (P) and virtual (V) IP address requirements

for all possible couplet configurations. Ideally, you should always assign enough IP addresses to

cater for expansion, namely the values in the 4 couplet column.

Table 12 Recommended versus required IP addresses, P (physical, V (virtual)

3 couplets2 couplets1 couplet

4 couplets,

RecommendedTemplate

7 Mgt, 6P+1V

5 Mgt, 4P+1V

3 Mgt, 2P+1V

9 Mgt, 8P+1V

Template 1, two

sub-nets (1 GbE Mgt,

10GbE Data)

12 Data, 6P + 6V8 Data (4P + 4V)4 Data (2P + 2V)

16 Data, 8P + 8V

1 Mgt (1V)

Template 2, single

network (1 GbE Mgt

and Data)

12 Data (6P + 6V)8 Data (4P + 4V)4 Data (2P + 2V)

16 Data (8P + 8V)

1 Mgt (1V)

Template 3, single

network (10 GbE Mgt

and Data)

12 Data (6P + 6V)8 Data (4P + 4V)4 Data (2P + 2V)

16 Data (8P + 8V)

7 Mgt, 6P+1V

5 Mgt, 4P+1V

3 Mgt, 2P+1V

9 Mgt, 8P+1V

Template 4, two

sub-nets (1 GbE Mgt,

1GbE Data)

12 Data, 6P + 6V8 Data (4P + 4V)4 Data (2P + 2V)

16 Data, 8P + 8V

14 Connecting to your network

Brand	HP
Model	StoreOnce B6000 Series
Category	Storage
Language	English

HP StoreOnce B6000 Series Planning And Preparation Guide

Table of Contents

Other manuals for HP StoreOnce B6000 Series

Questions and Answers:

HP StoreOnce B6000 Series Specifications

Related product manuals