10 Device Configuration
This page provides System Information and access to the device configuration functions:
• Device Configuration page (page 111)
• User Management (page 111)
• Email (page 113)
• Support Ticket (page 116)
Device Configuration page
System Information shows summary details for the HP StoreOnce Backup system that were set up
at installation. It cannot be modified from the GUI.
Table 33 Device configuration
DescriptionField
This is the serial number of the appliance. This is the
number that is required when licensing replication, Catalyst
System ID
or additional storage. It is referred to as the Cluster ID in
the StoreOnce CLI.
This text is used to label and identify the StoreOnce Backup
system. It is set by the user with the StoreOnce CLI system
set description command.
Description
User Management
Two user accounts, Admin and Operator, and passwords are created at installation and are always
included on this page. Users may use this page to modify the passwords. They may also create,
edit and delete additional users. (See also Types of user account (page 6).)
NOTE: User accounts may also be managed using StoreOnce CLI commands. See the HP
StoreOnce Backup system CLI Reference Guide.
Device Configuration page 111
To Next Page
Loading...
