Target Appliances tab
This tab allows you to view the details of all target appliances. Users with an Admin login can
also:
• “To Add a Target Appliance” (page 46)
• “To edit or remove a Target Appliance (administrators only)” (page 47)
• “Run Tracerout” (page 47)
NOTE: Although administrators can add Target Appliances on this page, it is not necessary to
do so before mapping configurations because this option is also available when running the
Replication wizard.
Summary Appliance details
The following status details are shown for both Target and Source appliances.
Table 10 Summary Appliance details
The name of the appliance.Appliance Name
The health of the appliance; this shows you whether the appliance is running.Appliance Status
The IP address of the appliance.Appliance Address
The serial number of the appliance.Serial number
The amount of free space on the appliance.Free space
Whether the appliance is online.Online
The protocol of the appliance software.Protocol version
Click on an appliance to view more detailed status information in the bottom half of the screen,
as described in the following table.
Partner Appliances (Replication) 45
To Next Page
Loading...
