HP StoreOnce - Page 13

Table 1 System information parameters (continued)
DescriptionParameter
The IP address for the StoreOnce Backup system. This is the IP address that you should
use when targeting backups and setting up replication mappings and Catalyst jobs.
IP Address
HP StoreOnce VSA Backup systems may have up to two IP addresses depending on how
the network is configured. See the HP StoreOnce VSA Deployment and Configuration
guide for more information.
The software revision running on the StoreOnce Backup system.Software revision
Status
This section provides details about the rolled-up system status of the system and the status of the
services running.
Table 2 Status parameters
DescriptionParameter
This is the overall system state.Overall Status
This is the status of the background support processes with which the customer does not
directly interact, such as EventManager and ResourceManager.
StoreOnce Subsystem
This is the status of the VTL service.Virtual Tape
This is the status of the NAS service.NAS
This is the status of the StoreOnce Catalyst service.StoreOnce Catalyst
This is the status of the Replication service.Replication
This is the status of the Housekeeping service.Housekeeping
System information and status 13