HP T750 User Manual

Power management 18
Power management
In this section
HP Power Manager features.................................................................................................................... 18
HP Power Manager features
HP Power Manager software ensures maximum power reliability of computer systems through
comprehensive control of UPSs. The easy-to-use browser interface enables novice users to configure and
manage power protection settings. To download the latest version of HP Power Manager software, see
the HP website (http://www.hp.com/go/rackandpower
).
NOTE: To install and configure the software, see the software user guide. The software user guide is
available for download from the HP website (http://www.hp.com/go/rackandpower
).
HP Power Manager:
• Does not require complex management systems, which simplifies deployment, configuration, and
management of UPS-protected environments.
• Manages a graceful shutdown of attached devices during utility power failures.
• Prioritizes the timing of attached load device shutdowns.
• Shuts down and reboots any UPS and attached load devices based on a user-specified schedule.
• Customizes alert generation with modifiable dialog boxes, command execution, and email and
broadcast messages.
• Monitors the status of the UPS and reports alarms.
• Displays a power log for analysis.

HP T750 Specifications

General

Output Voltage	230V
Input Voltage	230V
Interface Port	USB
Waveform Type	Stepped approximation to a sinewave
Nominal output voltage	230V
Nominal input voltage	230V
Battery Type	Sealed lead-acid (VRLA)
Topology	Line Interactive
Input frequency	50/60 Hz
Output Connections	IEC 320 C13
Input connection type	IEC 320 C14
Typical recharge time	8 hours
Audible alarm	Yes
Operating Temperature	0 - 40 °C
Approvals	CE
Frequency	50/60 Hz
Control panel	LED status indicators
Operating Relative Humidity	5% to 95% non-condensing