HP Xw4600 - Workstation - 2 GB RAM - Removing the Security Lock; Cable Lock (Optional); Removing the Cable Lock; Universal Chassis Clamp Lock (Optional)

Removing the security lock
To remove the padlock, unlock it and slide it out of the padlock loop as shown in the following figure.
Figure 5-3 Removing the security lock
Cable lock (optional)
If a cable lock is installed on your workstation, remove it before servicing the workstation.
Removing the cable lock
To remove the cable lock, unlock it and pull it out of the cable lock slot as shown in the following figure.
Figure 5-4 Removing the cable lock
Universal chassis clamp lock (optional)
If a universal chassis clamp lock is installed on your workstation, remove it before servicing the
workstation.
60 Chapter 5 Removal and replacement procedures ENWW