Removing the front bezel
To remove the front bezel:
1. Lift the two release snaps located on the front bezel (1).
Figure 5-11 Removing the front bezel
2. Rotate the front bezel away from the chassis to remove the bezel (2).
Replacing the front bezel
To replace the front bezel, align front bezel on the bottom and rotate in until it snaps into place.
Bezel blanks
This section describes how to remove bezel blanks
Removing bezel blanks
To remove bezel blanks:
1. Disconnect power from the system (
Predisassembly procedures on page 57) and remove the front
bezel (
Removing the front bezel on page 65).
ENWW Removing and replacing components 65
To Next Page
Loading...
