EasyManua.ls Logo

HP Xw4600 - Workstation - 2 GB RAM - PCI Card Slots; PCI Card Support Bracket

HP Xw4600 - Workstation - 2 GB RAM
181 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PCI card slots
The following figure illustrates the xw4600 Workstation PCI card slots.
Figure 5-25 Identifying PCI card slots
Table 5-6 PCI slots
Slot Type Slot power (Maximum)
1 PC-Express x1 25W
2 PCI-Express x16* 75W
3 PCI-Express x8 (x4) 25W
4 PCI-Express x16* 75W
5 PCI 32/33 25W
6 PCI 32/33 25W
7 PCI 32/33 25W
* The maximum graphics configuration can be: two 75W cards
(one in slot two; one in slot four), or one 150W card, in either slot
2 or slot 4. If a 150W card is used, the adjacent slot must remain
empty.
Graphics cards greater than 75W require the use of a graphics
cable adapter.
NOTE: In addition to these slot power specifications, the overall power consumption of the system
(including I/O cards, processor, and memory) must not exceed the maximum rating of the system power
supply.
PCI card support bracket
Some PCI cards have retainers installed to prevent movement during shipping.
76 Chapter 5 Removal and replacement procedures ENWW

Table of Contents

Other manuals for HP Xw4600 - Workstation - 2 GB RAM

Related product manuals