HP Z25xs G3 - Rear and Side Components; Rear and Side Ports

5
Rear and side components
To identify the components on the rear of the monitor, use this illustration and table.
Table 1-3 Rear components and their descriptions
Component
Description
(1)
OSD control
Pressing the center activates the OSD buttons so that the button labels appear on
the right side of the screen.
Up button: Next Active Input Down
button: Display Information Left
button: Brightness
Right button: Color
(2)
Security cable slot
Connects an optional security cable.
(3)
Power connector
Connects a power cord.
(4)
HDMI port
Connects the HDMI cable to a source device such as a computer.
(5)
DisplayPort connector
Connects the DisplayPort cable to a source device such as a computer.
(6)
DisplayPort Out connector
Connects a DisplayPort cable from the monitor to a secondary monitor.
NOTE: This connector is covered by a rubber plug. Remove the plug to connect a
downstream display.
(7)
USB Type-C port (upstream)
Connects a USB Type-C cable to a source device such as a computer. This USB Type-
C port can function as a DisplayPort audio/video input or as a USB upstream
connection, or it can be used to deliver up to 100 W of power to a device. Power outputs
are 5 V, 9 V, 12 V, 15 V, and 20 V with a total maximum output of 100 W.
This port also enables the downstream USB ports to perform their functions.
(8)
USB port (downstream)
Connects a USB cable to a peripheral device such as a keyboard, mouse, or USB
hard drive.
(9)
USB port (charging)
Connects a USB cable to a peripheral device, such as a keyboard, mouse, or USB
hard drive and supports battery charging.
(10)
USB port (downstream)
Connects a USB cable to a peripheral device, such as a keyboard, mouse, or USB
hard drive.
(11)
USB Type-C port (downstream)
Connects a USB Type-C cable to a peripheral device, such as a keyboard, mouse,
or USB hard drive.