HP Z440 Workstation Series Service Manual

Changing the power button configuration (Windows only)
CAUTION: To reduce the risk of data loss, do not use the power button to turn off the computer unless the
system is unresponsive.
NOTE: If the computer is unresponsive, press and hold the power button for four seconds to completely
turn off power to the computer.
Windows 7
1. Select Start, and then select Control Panel > System and Security > Power Options.
2. In the left pane, click Choose what the power buttons do.
3. Select the desired options.
If you choose Sleep or Hibernate, you can press the power button to initiate standby, and then press it again
to exit standby and return to your work. To completely turn off the workstation, select Start > Shut Down.
Windows 8
1. Point to the upper-right or lower-right corner of the Start screen to display the charms.
2. Select Search.
3. In the Search field, type control.
4. Select Control Panel, and then select System and Security > Power Options.
5. Select Choose What the Power Button Does.
6. Select the desired options.
44 Chapter 2 System management

HP Z440 Workstation Series Specifications

General

Chipset	Intel C612
Memory Slots	8 DIMM slots
Audio	Integrated Realtek HD ALC221 Audio
Processor Options	Intel Xeon E5-1600 v3 series; Intel Xeon E5-2600 v3 series
Memory	Up to 128 GB DDR4-2133 ECC
Graphics Options	NVIDIA Quadro or AMD FirePro professional graphics cards
Power Supply	700W 90% efficient, wide-ranging, active Power Factor Correction (PFC)
Operating System	Windows 10 Pro, Windows 7 Professional, or Linux
Weight	11 kg
Network	Integrated Intel I218LM PCIe GbE
Expansion Slots	1 PCIe Gen2 x1, 1 PCI