4. Remove the front bezel (3).
To install the front bezel, reverse the removal procedure.
Dust filter
To remove the dust filter, use these procedures.
Before removing the dust filter, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 26).
2. Remove the front bezel (Front bezel on page 27).
Remove the dust filter:
1. Position the front bezel upside down with the bottom toward you.
2. Lift the dust filter by the touchpoints to remove it from the front bezel.
28
Chapter 4 Removal and replacement procedures
To Next Page
Loading...
