b. To release the battery from its holder, squeeze the metal clamp (1) that extends above one
edge of the battery. When the battery (2) pops up, lift it out.
c. With the positive side up, insert the battery (1) onto the battery socket at an angle, and then
press the battery (2) down until it locks into place. The battery holder automatically secures
the battery in the proper position.
d. Rotate the cover (1) onto the battery socket, and then press the cover (2) down until it locks into
place.
To install the a battery, reverse the removal procedures.
Front fan
To remove the front fan, use these procedures.
36
Chapter 4 Removal and replacement procedures
To Next Page
Loading...
