HPC CodeMax - 2 Cutter Wheels; Cutter Wheel Descriptions

11
2. Cutter Wheels
2.1 Cutter Wheel Descriptions
The model CodeMax
®
is supplied with five
standard cutter wheels. The CW-1011 cutter
is used for cabinet, padlock, and most vehicle
applications. The CW-14MC cutter is used for
cutting most standard cylinder keys. The CW-
90MC is similar to the CW-14MC but makes cuts with
a steeper slope for special applications. The CW-20FM cutter
is a 76 degree cutter used for Sargent applications.
The CW-47MC is an 87 degree cutter used for certain
automotive applications.
Flat steel cutters, the Medeco
®
cutter (CW-1012), the Emhart cutter (CW-1013), and the
Assa Cutter (CW-32MC) are all optional cutter wheels that are available for use with the
CodeMax
®
. Additionally, the Medeco
®
Commercial Jaw (MJ-1) is an optional jaw for
cutting the Medeco
®
Standard Commercial Keyway (Air). The KeyMark
®
Jaw is available
from Medeco
®
.
CodeMax
®