Figure 7: Releasing the locking nut, HPE rack leveling bolt
b. With an adjustable wrench, turn the leveling bolt counterclockwise until fully raised.
Figure 8: Raising the leveling bolt, HPE rack
7. Close and secure the rack front and rear doors.
8. Unpack the Ramp Assembly Kit and install the ramps and ramp supports at the front of the pallet.
a. Unpack the two ramps and four wooden supports.
b. Extend the ramps to their full length.
Unpacking the factory-integrated-in-rack option: Process overview 17
To Next Page
Loading...
