More information
Component information
NOTE:
• The illustrations of components are examples only and might not accurately represent the
configuration of your HPE 3PAR StoreServ Storage system.
• Due to the large number of prospective configurations, component placement and internal cabling is
standardized to simplify installation and maintenance. The components are numbered according to
their order and location in the rack.
Adapter information
SAS adapter
HPE 3PAR Four-Port 12Gb SAS Host Bus Adapter
NVMe module
HPE 3PAR 750GB NVMe Storage Class Memory Module
Host PCIe adapters
Adapters Connectors
HPE 3PAR Two-Port 32Gb FC Host Bus Adapter
SFP28
HPE 3PAR Four-Port 16Gb FC Host Bus Adapter
SFP+
HPE 3PAR Two-Port 10Gb iSCSI Converged
Network Adapter
SFP+
HPE 3PAR Two-Port 10Gb Ethernet NIC Adapter
SFP+
Backup battery unit information
The storage system includes one backup battery unit (BBU) per controller node with a maximum of four
BBUs per system.
Depending on the controller node configuration, the controller node enclosure may include two or four
BBUs. The BBUs supply enough power to write the cache memory to the controller node drives during a
power failure.
56 More information
To Next Page
Loading...
