HPE 3PAR StoreServ 9000

LED/Port function Status State
Off Power cord not attached, no power supplies
installed, or power failure
2
Health Green solid Service processor on and health normal
Amber flashing Service processor health degraded
Red flashing Service processor health critical
Off Service processor power off
3
NIC status Green solid Link to network
Green flashing Network activity
Off No network link/activity
4
UID/Service Blue solid Active
Blue flashing Either remote management, firmware upgrade
in progress, or iLO manual reboot sequence
initiated
Physical service processor LEDs, HPE ProLiant DL360 Gen10 Server
Figure 61: Physical service processor LEDs, HPE ProLiant DL360 Gen10 Server rear view
Table 25: Physical service processor LEDs, HPE ProLiant DL360 Gen10 Server
rear view
LED function Status State
1
UID LED Blue solid Identification is activated.
Blue flashing System is being managed remotely.
Off Identification is deactivated.
2R
iLO 5/Standard NIC
activity LED
Green solid Activity exists.
Green
flashing
Activity exists.
Off No activity exists.
Table Continued
More information 85