Table 9: HPE 3PAR Two-Port 10Gb iSCSI Converged Network Adapter LEDs
LED Function Status Indicates
Fault Amber Solid Fault
Status Green Solid Normal operation; no fault
UID/Service Blue Solid Locate active; safe to remove
Blue Flashing Locate active; do not remove component
Two-port 10 Gb Ethernet NIC adapter LEDs
Figure 45: HPE 3PAR Two-Port 10Gb Ethernet NIC Adapter LEDs
Table 10: HPE 3PAR Two-Port 10Gb Ethernet NIC Adapter LEDs
LED Function Status Port state
1 Link/Status Green solid Normal/connected; link up
Green flashing Link down or not connected
2 Port/Speed Amber flashing Connected at high speed
Off Not connected - port failed or power not applied
3 Fault Amber solid Fault
4 Status Green solid Normal operation; no fault
Table Continued
72 More information
To Next Page
Loading...
