1. Management (MGMT) port; NIC 1
2. Service port; NIC 2
Figure 39: HPE ProLiant DL360 Gen10 Server details
For the HPE ProLiant DL360 Gen10 Server, the Service port, iLO Management port, and Serial port are
dedicated ports
NOTE: The ports are different than the HPE ProLiant DL120 Gen9 Server.
1. Slot 1 PCIe3
2. Slot 2 PCIe3
3. Slot 3 PCIe3 (optional - requires second processor)
4. Power supply 2 (PS2)
5. Power supply 1 (PS1)
6. Video port
7. NIC 4
8. NIC 3
9. NIC 2; Service port (Eth1)
10. NIC 1; Management port (Eth0)
11. iLO Management port
12. Serial port
13. USB 3.0 ports
14. FlexibleLOM (optional)
System information front view (typical component configuration)
Standardized placement of Storage components in a 1,075 mm HPE rack
NOTE:
• A virtual SP can be used with the storage system instead of a physical SP.
• With the 1,200 mm HPE rack, the power distribution units (PDUs) are mounted vertically at the rack
rear along the right edge.
66 More information
To Next Page
Loading...
