If the installer does not meet the profile or is not comfortable with the CSI process, Hewlett Packard
Enterprise recommends contacting your Hewlett Packard Enterprise sales representative or HPE Channel
Partner to purchase HPE Deployment Services
CSI installer responsibilities:
• Review all the relevant documentation for the HPE 3PAR StoreServ 9000 prior to initiating the
installation.
• Ensure that the host and SAN environment is supported and compliant with HPE recommendations
and best practices. Resolve any problems with the host and SAN environment prior to installing the
HPE 3PAR StoreServ 9000. The HPE 3PAR Implementation Guides and the HPE 3PAR Smart SAN
User Guide are available at the Hewlett Packard Enterprise Information Library website:
www.hpe.com/info/storage/docs
The Support Matrix is available at the Single Point of Connectivity Knowledge (SPOCK) website:
www.hpe.com/storage/spock
• Gather the required network and password information as indicated in the HPE 3PAR StoreServ
Software Setup Worksheet.
• Use the HPE 3PAR Guided Setup and HPE 3PAR StoreServ Management Console (SSMC) to set up
and configure the storage system.
Guidelines for the Customer Self Install of the HPE 3PAR StoreServ 9000 7
To Next Page
Loading...
