Apollo r2200 Gen10 Chassis (1U servers in AHCI mode)
Item Description
1 Server 1 drive bays
2 Server 2 drive bays
3 Server 3 drive bays
4 Server 4 drive bays
Apollo r2200 Gen10 Chassis (2U servers in AHCI mode)
Item Description
1 Server 1 drive bays
3 Server 3 drive bays
Apollo r2200 Gen10 Chassis (1U and 2U servers using embedded SATA S100i or a Smart Array
controller)
One 1U server corresponds to a maximum of three low-profile LFF hot-plug drives.
• Server 1 corresponds to drive bays 1-1 through 1-3.
• Server 2 corresponds to drive bays 2-1 through 2-3.
• Server 3 corresponds to drive bays 3-1 through 3-3.
• Server 4 corresponds to drive bays 4-1 through 4-3.
One 2U server corresponds to a maximum of six low-profile LFF hot-plug drives.
• Server 1 corresponds to drive bays 1-1 through 2-3.
• Server 3 corresponds to drive bays 3-1 through 4-3.
20 Identifying components and LEDs
To Next Page
Loading...
