HPE Apollo 2000 Gen10 System
Introduction
The HPE Apollo 2000 Gen10 System consists of a chassis and servers. There are four chassis options
with different storage configurations. To ensure proper thermal cooling, all server tray slots on the chassis
must be populated with servers or server tray blanks.
Chassis
• HPE Apollo r2200 Gen10 Chassis (12 low-profile LFF model)
• HPE Apollo r2600 Gen10 Chassis (24 SFF model, supports a maximum of 24 SFF SmartDrives or a
mix of 16 SFF SmartDrives and 8 NVMe drives)
• HPE Apollo r2800 Gen10 Chassis with 16 NVMe
• HPE Apollo r2800 Gen 10 Chassis (24 SFF model with storage expander backplane)
Servers
• HPE ProLiant XL170r Gen10 Server (1U)
• HPE ProLiant XL190r Gen10 Server (2U)
The chassis supports the combination of 1U and 2U servers. One chassis can support a maximum of the
following:
• Four 1U servers
• Two 1U servers and one 2U server
• Two 2U servers
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the
Hewlett Packard Enterprise website.
6 HPE Apollo 2000 Gen10 System
To Next Page
Loading...
Need help?
General
