HPE Apollo 2000 Gen10 User Manual

• HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply
• HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply
• HPE 2200W Flex Slot Platinum Hot Plug Low Halogen Power Supply
For more information about the power supply features, specifications, and compatibility, see the Hewlett
Packard Enterprise website .
HPE 800W Flex Slot Platinum Hot-plug Low Halogen Power Supply
Specification Value
Input requirements —
Rated input voltage
100 VAC to 127 VAC
200 VAC to 240 VAC
240 VDC for China only
Rated input frequency
50 Hz to 60 Hz
Not applicable to 240 VDC
Rated input current
9.1 A at 100 VAC
4.4 A at 200 VAC
3.6 A at 240 VDC for China only
Maximum rated input power
899 W at 100 VAC
867 W at 200 VAC
864 W at 240 VDC for China only
BTUs per hour
3067 at 100 VAC
2958 at 200 VAC
2949 at 240 VAC for China only
Power supply output —
Rated steady-state power
800 W at 100 VAC to 127 VAC input
800 W at 100 VAC to 240 VAC input
800 W at 240 VDC input for China only
Maximum peak power
800 W at 100 VAC to 127 VAC input
800 W at 100 VAC to 240 VAC input
800 W at 240 VDC input for China only
76 HPE 800W Flex Slot Platinum Hot-plug Low Halogen Power Supply

HPE Apollo 2000 Gen10 Specifications

General

Form Factor	2U
Maximum Number of Nodes	4
Management	HPE iLO 5
Processor Support	Intel Xeon Scalable processors
Power Supply	2 x 1600W Platinum Hot-Plug Power Supplies
Cooling	Hot-Plug Fans with N+1 Redundancy
Drive Bays	12 LFF or 24 SFF
Memory Capacity	Up to 3TB per node
Expansion Slots	3 PCIe 3.0 slots per node
Networking	Integrated 1GbE or optional 10/25GbE