HPE Apollo 4200 Gen10 Service Manual

HPE Apollo 4200 Gen10 System Maintenance and Service
Guide
Part Number: P08482-008
Published: November 2020
Edition: 8
Abstract
This guide describes identification and maintenance procedures, diagnostic tools, specifications and requirements for hardware
components and software. This guide is for an experienced service technician. Hewlett Packard Enterprise assumes that you
are qualified in the servicing of computer equipment, trained in recognizing hazards in products, and are familiar with weight
and stability precautions.

HPE Apollo 4200 Gen10 Specifications

General

Processor	Intel Xeon Scalable processors
Form Factor	2U
Number of Processors Supported	2
Number of Memory Slots	24 DIMM slots
Remote Management	HPE iLO 5
Networking	FlexibleLOM and PCIe standup options
Power Supply	HPE Flexible Slot Power Supplies
Drive Bays	24 x 2.5" or 12 x 3.5"
GPU Support	Yes
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Storage	SAS/SATA/NVMe SSD/HDD

Summary

Customer Self Repair Program

Illustrated Parts Catalog

System Components

Details system components like heatsinks, DIMMs, and processors.

Removal and Replacement Procedures

Safety Considerations

Outlines safety precautions before performing service.

Removing and Replacing a Power Supply

Steps to remove and install system power supplies.

Removing and Replacing a DIMM

Procedures for removing and replacing system DIMMs.

Removing and Replacing the System Board

Procedures for removing and installing the system board.

Diagnostic Tools

Intelligent Provisioning

Component Identification