a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the system.
3. Remove the system from the rack (
Remove the system from the rack).
4. Place the system on a flat, level work surface.
5. Remove the access panel.
Remove the rear drive cage blank
Procedure
1.
Power down the system (Power down the system).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the system.
3.
Remove the system from the rack (
Remove the system from the rack).
4. Place the system on a flat, level work surface.
5. Remove the access panel (
Remove the access panel).
6. Remove the rear drive cage blank.
Removal and replacement procedures
40
To Next Page
Loading...
