Need help?Do you have a question about the HPE SimpliVity 2600 Gen10 and is the answer not in the manual?
General| Processor | Intel Xeon Scalable Processors |
|---|---|
| Form Factor | 2U |
| RAID Support | HPE Smart Array controllers |
| Operating System Support | VMware vSphere |
| Management | HPE iLO |
| Memory | HPE DDR4 SmartMemory |
| Power Supply | HPE Redundant Power Supplies |
Details the physical and logical components of the HPE SimpliVity 2600 Gen10 server system.
Step-by-step procedure for physically installing the chassis into a rack.
Instructions for connecting the system's power supplies and network interfaces.
Steps to configure the iLO port for out-of-band web-based management.
Instructions for accessing the iLO web interface and launching the remote console.
Explains front panel LEDs and their states for identifying server hardware issues.
Details drive LEDs and their states to monitor drive status and identify failures.
Step-by-step instructions for safely replacing a failed or failing SSD drive.
Detailed steps for safely removing and replacing a failed power supply unit.
To Next Page