HPE SimpliVity 2600 Gen10

Chapter 1: Component identification 5
Chapter 1: Component identification
This section contains the following topics:
• HPE SimpliVity 2600 Gen10 server components
• Specifications
• Component upgrades
• Firmware revisions
The HPE SimpliVity 2600 Gen10 system consists of a 2U rack-mountable chassis containing up to 4 individual
servers based on application requirements.
Support services are available through the Hewlett Packard Enterprise Support Center website:
support.hpe.com. Additional product documentation is available through the Hewlett Packard Enterprise
Information Library: http://www.hpe.com/info/simplivity2600-Gen10-docs.
HPE SimpliVity 2600 Gen10 server components
The HPE SimpliVity 2600 Gen10 chassis accomodates up to four 1U HPE SimpliVity 170 Gen10 servers or two
2U HPE SimpliVity 190 Gen10 servers based on storage and processor requirements.
Model Intel
®
Xeon
®
Scalable processorsProcessor
Processor count HPE SimpliVity 170 Gen10: 1 or 2 per server
HPE SimpliVity 190 Gen10: 2 per server
Quantity 6 per server
Dimension 2.5" (2.5" carrier)
RAID type Tiered storage consisting of:
• RAID 1+0
• RAID 5
Front SSD drives
Capacity 1.92 TB per drive
Quantity 1 required per server (although two are
provided per server, the second boot drive is
unused in this configuration)
Capacity 480 GB
Boot drives
Interface SATA M.2
Effective storage capacity Total raw storage capacity
without compression and
deduplication effects.
6.9 TB per node