NVMe rear drive cage cabling
The six-bay SFF NVMe rear drive cage comes with preinstalled cabling. Connectors on the cables will connect to corresponding
connectors on an NVMe pass-through assembly installed in slot 2, slot 6, or slots 2 and 6.
• NVMe rear drive cage cabling to pass-through board in slot 2
◦ NVMe P1 to pass-through P1 in slot 2
◦ NVMe P2 to pass-through P2 in slot 2
◦ NVMe P3 to pass-through P3 in slot 2
• NVMe rear drive cage cabling to pass-through board in slot 6
◦ NVMe P1 to pass-through P1 in slot 6
◦ NVMe P2 to pass-through P2 in slot 6
◦ NVMe P3 to pass-through P3 in slot 6
Cabling
133
To Next Page
Loading...
