HPE Apollo 2000 Gen10 User Manual

HPE 800W Flex Slot Universal Hot-plug Low Halogen Power Supply
Specification Value
Input requirements —
Rated input voltage
200 VAC to 277 VAC
380 VDC
Rated input frequency 50 Hz to 60 Hz
Rated input current
4.4 A at 200 VAC
3.1 A at 277 VAC
2.3 A at 380 VDC
Maximum rated input power
869 W at 200 VAC
865 W at 230 VAC
861 W at 277 VAC
863 W at 380 VDC
BTUs per hour
2964 at 200 VAC
2951 at 230 VAC
2936 at 277 VAC
2943 at 380 VDC
Power supply output —
Rated steady-state power
800 W at 200 VAC to 277 VAC input
Maximum peak power
800 W at 200 VAC to 277 VAC input
HPE 800W Flex Slot -48VDC Hot-plug Low Halogen Power Supply
Specification Value
Input requirements —
Rated input voltage
-40 VDC to -72 VDC
-48 VDC nominal input
Rated input current
22.1 A at -40 VDC input
18.2 A at -48 VDC input, nominal input
12.0 A at -72 VDC input
Rated input power (W)
874 W at -40 VDC input
865 W at -48 VDC input, nominal input
854 W at -72 VDC input
Table Continued
HPE 800W Flex Slot Universal Hot-plug Low Halogen Power Supply 77

HPE Apollo 2000 Gen10 Specifications

General

Form Factor	2U
Maximum Number of Nodes	4
Management	HPE iLO 5
Processor Support	Intel Xeon Scalable processors
Power Supply	2 x 1600W Platinum Hot-Plug Power Supplies
Cooling	Hot-Plug Fans with N+1 Redundancy
Drive Bays	12 LFF or 24 SFF
Memory Capacity	Up to 3TB per node
Expansion Slots	3 PCIe 3.0 slots per node
Networking	Integrated 1GbE or optional 10/25GbE