EasyManua.ls Logo

HPE Aruba 3810 - Viewing OSPF area information

HPE Aruba 3810
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Field Content
RFC 1583 compatibility Whether the routing switch is currently using RFC 1583 (compatible)
or RFC 2328 (non-compatible rules for calculating external routes.
Intra-area distance Administrative distance for routes within OSPF areas.
Inter-area distance Administrative distance for routes between areas within the same
OSPF domain.
AS-external Administrative distance for routes between the OSPF domain and
other, Exterior Gateway Protocol domains.
Default import metric Default metric that will be used for any routes redistributed into OSPF
by this routing switch
Default import metric type Metric type (type 1 or type 2) that will be used for any routes
redistributed into OSPF by this routing switch.
Area Border Whether this routing switch is currently acting as an area border
router.
AS Border Whether this routing switch is currently acting as an AS border router
(redistributing routes.)
External LSA Count Total number of external LSAs currently in the routing switch's link
state database.
External LSA Checksum Sum Sum of the checksums of all external LSAs currently in the routing
switch's link state database (quick check for whether database is in
sync with other routers in the routing domain.)
Originate New LSA Count Count of the number of times this switch has originated a new LSA.
Receive New LSA Count Count of the number of times this switch has received a new LSA.
Graceful Restart Interval Maximum seconds between graceful restarts.
Graceful Restart Strict-Lsa Checking Whether LSA checking is enabled or disabled (terminates graceful
restart when a change to an LSA would cause flooding during the
restart.)
Nonstop forwarding Whether nonstop forwarding (NSF) is enabled or disabled.
Log Neighbor Adjacency Changes Whether changes in adjacent neighbors are logged.
Viewing OSPF area information
Syntax:
show ip ospf area [ospf-area-id]
The [ospf-area-id] parameter shows information for the specified area. If no area is specified, information for
all the OSPF areas configured is displayed.
224 Aruba 3810 / 5400R Multicast and Routing Guide for ArubaOS-
Switch 16.08

Table of Contents

Related product manuals