Field Description
Helper Status Whether the neighboring router is helping the OSPF router. The possible
values are:
Helper
The neighbor is helping.
None
The neighbor is not helping.
Helper Age Amount of time the neighboring router is helping. This time can range from
1 to 1800 seconds with a default time of 120 seconds. Helper Age is 0
when the router is not helping.
Viewing OSPF redistribution information
As described under Enabling route redistribution on page 205, you can configure the routing switch to
redistribute connected, static, and RIP routes into OSPF. When you redistribute a route into OSPF, the routing
switch can use OSPF to advertise the route to its OSPF neighbors.
To display the status of the OSPF redistribution, enter show ip ospf redistribute at any CLI context level:
Example of output for show ip ospf redistribute
switch# show ip ospf redistribute
OSPF redistributing
Route type Status
---------- --------
connected enabled
static enabled
rip enabled
The display shows whether redistribution of each of the route types, connected, static, and RIP is enabled.
Viewing OSPF redistribution filter (restrict) information
As described under Configuring external route redistribution in an OSPF domain (optional) on page 205,
you can configure the redistribution filters on the routing switch to restrict route redistribution by OSPF.
To display the status of the OSPF redistribution filters, enter show ip ospf restrict at any CLI context level.
Example of output for show ip ospf restrict
switch# show ip ospf restrict
OSPF restrict list
IP Address Mask
--------------- ---------------
10.0.8.0 255.255.248.0
15.0.0.0 255.0.0.0
This display shows the configured restrict entries.
240 Aruba 3810 / 5400R Multicast and Routing Guide for ArubaOS-
Switch 16.08
To Next Page
Loading...
