Description
Enable or disables mDNS gateway support on switch.
The no form of the command disables mdns. The default value is disabled.
Command context
configwith manager permissions.
Create mDNS reflection
This command is supported in the config context.
Syntax
mdns gateway vlan VLAN-LIST
[no] mdns gateway vlan VLAN-LIST
Description
Configures the VLAN reflection for mDNS traffic. If the VLAN is not set, the mDNS traffic will not flood to different
subnets, it will only flood to the incoming VLAN.
Options
gateway
Enable VLAN for mDNS gateway.
Create or delete a mDNS profile
This command will be supported on config context in manager mode. This is a context command. Separate
context is created for this.
Syntax
mdns profile PROFILE-NAME
no mdns profile PROFILE-NAME
Description
Create or delete an mDNS profile.
rule
Syntax
rule rule-id instance | service NAME action permit | deny
no rule rule-id instance | service NAME action permit | deny
Description
Sets rules for each mDNS profile. You can configure specific rule to permit or deny the mDNS packet.
Command context
config. This command is supported in the mDNS profile context.
452 Aruba 3810 / 5400R Multicast and Routing Guide for ArubaOS-
Switch 16.08
To Next Page
Loading...
