To Next Page

To Previous Page

Reference

Hardware components

The HPE 12Gb SAS disk enclosures are available in the following models:

• D3600/D3610: Supports up to 12 Large Form Factor (LFF) SAS drives for a maximum capacity of 72 TB with 600 GB

SAS drives or 120 TB with 12G 10 TB SAS MDL or 6G 10TB SATA MDL drives.

• D3700/3710: Supports up to 25 Small Form Factor (SFF) SAS drives for a maximum capacity of 45 TB with 12G 18

TB SAS drives or 50 TB with 12G 2 TB SAS MDL or SATA MDL drives. The D3700/3710 also supports 12G SAS and

6G SATA Solid State Drives (SSD).

NOTE:

• Each enclosure is shipped with an optional Digital Rain bezel which customers can install as needed. The graphics in

this guide are portrayed without the bezel for clarity.

• Depending on your disk enclosure model and controller installation environment, one or more disk enclosures can be

cascaded from the disk enclosure that is connected to the controller. For more information see the HPE D3000

Enclosures QuickSpecs, on the Accessing QuickSpecs website.

Figure 3: D3600/D3610 LFF Enclosure

Figure 4: D3700/D3710 SFF Enclosure

Reference

Other manuals for HPE D3000

Questions and Answers:

Need help?

Do you have a question about the HPE D3000 and is the answer not in the manual?

General