more information, see : HPEHPE GreenLake for Compute Ops Management Getting Started Guide GreenLake for Compute Ops Management Getting Started Guide .
ControllersControllers
SubtopicsSubtopics
Installing a type-o storage controllerInstalling a type-o storage controller
Installing a type-p storage controllerInstalling a type-p storage controller
Installing a type-o storage controllerInstalling a type-o storage controller
PrerequisitesPrerequisites
Before installing this option, be sure you that have the following:
The components included with the hardware option kit
T-10 Torx screwdriver
ProcedureProcedure
1. Power down the server .
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the rear wall blank or riser cage.
6. Remove the OCP adapter blank.
To Next Page
Loading...
