DIMM-processor compatibilityDIMM-processor compatibility
Fourth-generation Intel Xeon Scalable processors support DDR5-4800 DIMMs.
Do not mix DIMMs. Install only the supported DDR5-4800 DIMMs in the server.
HPE SmartMemory speed informationHPE SmartMemory speed information
For more information about memory speed information, see the Hewlett Packard Enterprise website (https://www.hpe.com/docs/memory-
speed-table).
Installing a DIMMInstalling a DIMM
PrerequisitesPrerequisites
Before installing this option, be sure you have the following:
The components included with the hardware option kit
For more information on specific options, see the server QuickSpecs on the Hewlett Packard EnterpriseHewlett Packard Enterprise website website .
About this taskAbout this task
The server supports up to 32 DIMMs.
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove the air baffle .
6. Open the DIMM slot latches.
To Next Page
Loading...
