7. Connect the cable to the system board.
8. Install the access panel .
9. Install the server in the rack.
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server.
ResultsResults
The installation is complete.
MemoryMemory
SubtopicsSubtopics
Memory population informationMemory population information
DIMM-processor compatibilityDIMM-processor compatibility
HPE SmartMemory speed informationHPE SmartMemory speed information
Installing a DIMMInstalling a DIMM
Memory population informationMemory population information
For specific memory population information, see the memory population guidelines on the Hewlett Packard Enterprise website
(https://www.hpe.com/docs/server-memoryhttps://www.hpe.com/docs/server-memory).
To Next Page
Loading...
