10. Install the fan cage.
11. Install the air baffle or midplane drive cage.
12. Install the access panel .
13. Slide the server into the rack.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server .
ResultsResults
The installation is complete.
OS boot deviceOS boot device
SubtopicsSubtopics
Installing boot device drivesInstalling boot device drives
Installing the HPE NS204i Boot DeviceInstalling the HPE NS204i Boot Device
Installing boot device drivesInstalling boot device drives
ProcedureProcedure
1. Push the button to pull out the carrier.
To Next Page
Loading...
