HPE ProLiant MicroServer Gen11 - Ilo-M.2-Serial Module Spare Part; Serial Port Cable Spare Part; Removal and Replacement Procedures

ItemItem DescriptionDescription
1 Serial port cable spare part
2 M.2 SSD
For more information on the removal and replacement procedures, see Removing and
replacing the iLO-M.2-serial module.
3 iLO-M.2-serial module spare part
4 SFF drive
For more information on the removal and replacement procedures, see Removing and
replacing an SFF drive.
5 LFF drive
For more information on the removal and replacement procedures, see Removing and
replacing an LFF drive.
Not shown
SubtopicsSubtopics
iLO-M.2-serial module spare partiLO-M.2-serial module spare part
Serial port cable spare partSerial port cable spare part
iLO-M.2-serial module spare partiLO-M.2-serial module spare part
Customer self repair: MandatoryMandatory
DescriptionDescription Spare part numberSpare part number
iLO-M.2-serial module P26371-001
For more information on the removal and replacement procedures, see Removing and replacing the iLO-M.2-serial module .
Serial port cable spare partSerial port cable spare part
Customer self repair: MandatoryMandatory
DescriptionDescription Spare part numberSpare part number
Serial port cable P66544-001
For more information on the removal and replacement procedures, see Removing and replacing the serial port cable .
Removal and replacement proceduresRemoval and replacement procedures
This chapter provides detailed instructions on how to remove and replace component spare parts.
*
*
HPE ProLiant MicroServer Gen11 Maintenance and Service Guide 19