5. Connect the power cord to the tape drive.
6. Connect the other end of the power cord to a grounded power outlet.
WARNING:
The supplied power cord is approved for your specific geographic region. Use of a non Hewlett
Packard Enterprise approved power cord can result in:
• not meeting individual country-specific safety requirements
• insufficient conductor ampacity that could result in overheating with potential personal injury
and/or property damage
• an unapproved power cord could fracture resulting in the internal contacts being exposed which
potentially could subject the user to a shock hazard.
Hewlett Packard Enterprise disclaims all liability in the event a non-Hewlett Packard Enterprise
approved power cord is used.
14 Installing an external tape drive
To Next Page
Loading...
