- 17 -
a)
b)
If an interrupon of work of more than 3 hours is expected
the baery must be removed from the tool. Otherwise it cannot be excluded that the
baery will be permanently damaged.
c)
Remove the baery from the charger as soon as possible aer
charging is complete.
d) -
In both instances low currents
ow which totally discharge the baery and can permanently damage it.
e)
If the baery is stored separately from the tool and the charger it’s ca-
pacity will remain constant for a long period of me (loss approx. 5% per year).
f) This prevents
accidental switching on of the machine as well as a total discharge of the baery.
g)
If the baery gets warmer than 50°C during operaon (charging or discharg-
ing) it must be immediately separated from the charger or the tool.
h)
The baery uid is corrosive and
can cause chemical burns to ssue. If the uid comes into contact with the skin it must
be washed immediately with soap and water and then rinsed with lemon juice or vin-
egar. If the uid comes into contact with the eyes they must be rinsed for at least 10
minutes with water and a doctor must be consulted immediately.
i)
j)
NOTE
Lithium-Ion batteries have almost no self-discharge and have no memory
effect. With proper and professional handling your tool will be reliably
supplied with high energy density for a long period of time.
To Next Page
Loading...