61
Figure 4-2-11
1、Disk Brake Plate
Caution: 1. If the thickness of the disk brake
plate is less than 2.5mm, it must be replace.
2. In occasion of crack or distortion, the
disk brake plate must be replaced.
h)Disk brake plate uses hydraulic pressure of the brake fluid.
Therefore, fuel pipe must be periodically inspected and
replaced.
Inspection Method: Fuel pipe must be replace when worn out,
cracked or distorted.
4.2.2.2
Disassembly, Inspection and Assembly of Rear Disk Brake System:
4.2.2.3 Disassembly of Rear Disk Brake System
1.detach Rear Disk Brake Pump from the Frame
(Figure 4-2-6)
2.Remove Rear Disk Brake oil bowl from the Frame
(Figure 4-2-9)
To Next Page
Loading...