60
e)Inspect the elasticity
of the brake handlebar.
f)Brake fluid will be
automatically injected
into the fuel pipe in Figure 4-2-10
1、Rear Brake Pedal
the process of
abrading brake pad
reducing the fluid level in the box. Therefore, periodical
inspection of the fluid level is necessary.
Caution: must use DOT4 Brake Fluid
。
g) Periodical inspection of the wear condition of front disk
brake plate is also necessary.
Disk brake plate must be replaced depending on its wear
condition. (Figure 4-2-11)
To Next Page
Loading...