HTC DURATIQ Machine description
28 www.htc-floorsystems.com
D002998, 01.06
No. Symbol Name Explanation
1
Radio
Lit when the machine is in radio mode.
When in radio mode, only the Emergency
Stop Button and the Radio Button on the
machine's control panel function.
Light front Lit when the front light is activated.
Light back Lit when the rear light is activated.
Mist Cooler System
Lit when the Mist Cooler System is
active. Colour changes to yellow when
the water level in the tank is low.
Water Supply Lit when the water supply is active.
Extra Lit when the output Extra is active.
2 Vacuum Cleaner Future selections
3
Service
Service shines orange 50 h or 2 weeks
prior to service. Turns red once the
service interval has been exceeded.
Warning
Warning symbol is lit when warning or
fault occurs. Symbol indicates type of
fault.
4 Time Shows time and date.
5
Power Meter – Available
power
Show the amount of power available.
6 Power Meter – Power used
The level indicator and the ring around
the value change colour depending on
how much of the available power is being
used. The ring is green when the
grinding power is 0-100%, yellow
100-115% and red from 115%.
7
Water Flow / Propulsion
Speed
Water Flow 0-100% / Propulsion Speed
0-15 m/min.
8 Current Shows motor current.
9
Overload / Overload
Protection
Overload indication, warns at 90%. The
machine switches off at 100%.
To Next Page
Loading...
