HTC DURATIQ T6 - Grinding Operations; Manoeuvring via Control Panel

HTC DURATIQ Grinding
38 www.htc-floorsystems.com
D002998, 01.06
6 Grinding
Connect a dust extractor to the machine. For available models of dust extractors, go to HTC's
website www.htc-floorsystems.com for more information.
Place the handle to the working position, see page 32.
WARNING
Risk for personal injury.
Do not let the cable come into contact with the rotating tools.
NOTE
Inspect the floor carefully and remove any objects sticking up,
such as, for example, reinforcement rods or bolts, and any
debris that could get stuck in the machine or be thrown out.
6.1 Manoeuvring via the Control Panel
During manual grinding, the machine is run forwards across the floor surface and the
processing is controlled via the control panel.
For description of the control panel, see Description of Controls – Control Panel (HMI), see
Description of Controls – Control Panel (HMI) page 25.