HTC DURATIQ Accessories
D002998, 01.06
www.htc-floorsystems.com 51
7.4.2 Registration
TIP
Until the GPS tracker is registered, alarm functions cannot be
activated and anybody can trace the position of the GPS
tracker.
TIP
A SIM card with SEK 100 from Telenor is enclosed. In
countries outside Sweden, it may be easiest and simplest to
acquire a SIM card from a local operator to reduce costs and to
simplify handling.
Register your GPS tracker on https://db.redknows.com/MiniFinder/default.php.
The following information should be registered:
• The mobile number that will have access to the GPS tracker.
• Size of Geofence alarm.
• Sensitivity of the Vibration Sensor.
• The awake time of the GPS (how frequently the position will be checked).
• The unit in which the speed will be given.
• Positions in text message on map on mobile or long & lat.
• Activate the alarm function so the GPS gives an alarm when the voltage to which it is
connected
• is less than a selected level.
• Activates an alarm on loss of external voltage.
7.4.3 Use
The following functionality is obtained with the GPS tracker.
• Locks the grinding machine for unauthorised users (same as code alarm on screen).
• Traces the grinding machine, obtains the machine's position.
• Vibration alarm, activated if the machine is disturbed.
• Geofence alarm, activated if the machine moves outside a defined area.
• Voltage alarm, gives an alarm if the machine's battery is less than 24 V, disconnected or if
the GPS tracker's internal battery level is <20%.
• SOS, signal sent to defined telephone number.
All commands can be given using both the remote control and via text message, however,
with one large difference.
To Next Page
Loading...
