HTC DURATIQ Grinding
D002998, 01.06
www.htc-floorsystems.com 39
6.1.1 Manual Grinding
Make sure the emergency stop switch (1) is not activated. If not, turn clockwise according to
arrows on the switch.
Press the button on/off (2).
Start the dust extractor, if dry grinding is to be done.
Choose direction of rotation (3).
Set the speed for the grinding discs using the knob (4).
Start the grinding by pressing on (5).
When the machine is not in use, press on/off for 3 seconds, to switch the machine off.
6.1.2 Emergency Stop Switch
The emergency stop switch should only be used in an emergency, because it shortens the
service life of the machine's electrical components.
When the emergency stop switch is pressed, the power to all electrical moving parts on the
machine is turned off. Reset by turning the switch clockwise. The machine can then be
restarted.
To Next Page
Loading...
