HTC DURATIQ Accessories
44 www.htc-floorsystems.com
D002998, 01.06
7.1.2 Radio Receiver
No. LED Lamp Explanation
1 POWER
Is not lit The receiver is not powered up.
Lit
The receiver is powered up but does not have radio
link.
Flashes The receiver is powered up and has radio link.
2 ALARM
Is not lit The receiver is working correctly.
Lit Not working correctly.
Flashes Fault in emergency stop loop.
3 RUN
Is not lit CAN communication is inactive.
Lit The receiver is not transmitting CAN bus commands.
Flashes The receiver has contact with the CAN bus network.
4 ERR
Is not lit CAN bus is OK.
Lit CAN bus cannot contact CAN bus controller.
Flashes CAN bus is not working.
To Next Page
Loading...
