HTC DURATIQ Operation
D002998, 01.06
www.htc-floorsystems.com 31
5 Operation
5.1 General
The following section describes how to change tools and how to operate the grinding
machine. This section does not deal with the technical aspects of grinding, such as selection
of grinding tools, etc.
For choice of tool, go to HTC's website www.htc-floorsystems.com for more information.
5.2 Handle setting
WARNING
Risk of crushing.
Risk for personal injury.
NOTE
Ensure that the handle lock locks properly in the position
wanted when adjusting the handle.
No. Description
1 HMI adjustment
2 Handle adjustment
3 Handlebar rough adjustment
4 Handlebar fine adjustment
To Next Page
Loading...
