HTC DURATIQ Accessories
54 www.htc-floorsystems.com
D002998, 01.06
Switch off the Mist Cooler System by
pressing the same button once grinding is
finished.
7.5.2 Wet grinding
NOTE
Make sure the water supply is only on during grinding. Always
use liquid suction when wet grinding.
Wet grinding with water is used when grinding difficult to grind floors. It is also used to obtain
a greater performance or lower temperature during grinding.
Grinding
Set the handle to the working position. See
page 32.
Connect the water using the quick release
coupling on the rear of the machine. For
pressure and maximum flows, see Technical
Data page 65.
An electrically controlled proportional valve
controls the water flow.
To Next Page
Loading...
